Control & Sequencing
AssemblyPLC managing injection timing, pump displacement ratio, vacuum dwell, and mold release sequence. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control & Sequencing
5 top-level lines as of r140770| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | RTM Controller | resin-transfer-molding-machine-plc | 1× | 1 | · | part |
| 2 | HMI Panel | resin-transfer-molding-machine-hmi | 1× | 1 | · | part |
| 3 | Pressure Control | resin-transfer-molding-machine-pressure-controller | 1× | 1 | · | part |
| 4 | Timer Module | resin-transfer-molding-machine-timer-relay | 1× | 1 | · | part |
| 5 | E-Stop System | resin-transfer-molding-machine-emergency-stop | 1× | 1 | · | part |